Tuscan Brown

Brown

Prepared

Liquid

Water-based

Cement, Sheet metal, Plaster, Wood

Brush, Paint roller, Paint sprayer

14 m²/L

17 m²/L

2

Yes

Yes

Brown

Yes

Satin

Surfaces to be painted must be dry and clean of dust, efflorescence, rust, grease, wax, etc., and properly primed. Perfectly homogenize the product before use. New surfaces: Wood / Plaster. Prime with Sellatine wood preparation. Iron / Steel. Prime with Brumin. Non-ferrous metals. Prime with Bruguer Multipurpose Preparation. (Aluminum, Galvanized, etc.) Painted surfaces: If the old paint is in good condition, sand to mattify, remove dust, and apply one or two coats of Esmalte Acrylic Satinado. If the old paint is in poor condition, it must be removed and proceed as a new surface.

We recommend applying one or two coats of Esmalte Acrylic Satinado; and on surfaces between 10 and 35ºC. This is a ready-to-use enamel for application with a brush or roller; for spray guns, dilute a maximum of 10% with water. On large surfaces, we recommend spreading it with a short-hair wool roller, and then going over it with a compact foam roller. Furthermore, on new surfaces we recommend priming the surfaces: On wood, plaster or cement we advise Preparación Universal Acrylic; on metals, Preparación Antioxidante; and on non-ferrous metals we recommend priming with Preparación Universal Acrylic. No more buying a different paint for every single surface! With Esmalte Acrílico Satinado Multisuperficie you can protect and decorate everything that comes to mind: wood, iron, plaster, cement… As a leading company in color, at Bruguer we have a wide palette of colors for the satin acrylic enamel: Blanc Permanent or cotton, fuchsia, orange, magenta, cream, ivory, brown, turquoise blue, sky blue… Therefore, whatever you want to convey, you can do it.

36 months from manufacture, in its original packaging.

Water.

0.3 h

6 h

35 °C

10 °C

0.75 L

1 piece(s)